Loops Active Bluetooth Ceiling Speaker Kit 5.25" 80W Waterproof - Moisture Resistant Bathroom & Shower Audio System for Home, Gym, and Outdoor Use

Technical Specification: Power supply - In-line 100-240VAC/12VDC PSU (included) Output power: max. - 2 x 40W Output power: RMS - 2 x 25W LF driver - 130mmØ (5.25") rubber edge PP cone HF driver - 12mm (0.5") Rubber dome tweeter Frequency response - 80Hz - 20kHz Sensitivity - 88dB Housing material - ABS plastic Mounting depth - 75mm Cutout - 174mmØ (each speaker) Impedance - 8 Ohms (each speaker) Weight (per set) - 1.8kg Installing the speakers: This is as simple as installing any other ceiling speaker, simply cut-out 2 holes in your ceiling for the speakers, a guide template is supplied to make marking the holes as easy as possible. The next thing you need to do is ensure that you have a mains power source in the ceiling so that you can plug our power supply into it. After that, feed the supplied 3m speaker cable from the first hole you have cut out to the second hole you have cut out. If you need a longer length of cable, please get in touch as we can supply you with this but as a general rule, you don’t want the speakers to be too far apart. The final step is to fit the speakers to the ceiling and connect the two speakers together via the pre-installed cable. No soldering or crimping is required, just a screwdriver. When you have inserted the speakers into the ceiling, simply tighten the screws connected to the dog-ear mounts, as you tighten, they will grip to the ceiling guaranteeing a sturdy installation. Don’t worry if that didn’t make sense, an illustrated instruction manual is supplied to help you. A lot of speakers on the market can look bulky & cumbersome but once installed, our speakers sit almost flush to the ceiling and the frameless grille has an extremely low profile. The fine mesh grilles can be removed easily for cleaning & repainting, should you need them to match your décor.

Kit Contents 1x Active Bluetooth Speaker | 1x Passive Speaker | 1x 12V DC UK Mains Power Supply (1m Length) | 1x 3m Speaker Cable (joins active and passive speakers together) | 1x Ceiling Cut-Out Template

Thanks to the system being Active, you do not need an amplifier to power them. One of the speakers has a built-in amplifier & Bluetooth receiver. Once powered up using the supplied power cable, you can stream music to the pair of speakers wirelessly via Bluetooth from your Smartphone or Tablet for example. All features such as controlling volume or skipping tracks ETC are controlled from your device, it couldn’t be simpler!

This system is also moisture resistant meaning that you can safely install these in a bathroom / shower room & kitchen.

Dual Audio Bluetooth – Newer android devices are installed with a Bluetooth feature called “Dual Audio”. Without going into this too much, this feature allows you to connect to 2 Bluetooth systems from 1 device at the same time

If you require any technical advice or would just like a chat with our technical department to see if this would be the right kit for you, please feel free to get in touch.